#464 Hole Punch – Round Holes, 2 or 3 Characters
A sturdy tool extensively used in mills and
canneries for punching piecework and time cards. Punches two inches from edge of card, has wide
range of punching specifications.
Description:
Heavy-duty hole punch that punches up to two inches from the edge.
Choose from: 1/8″, 3/16″, 1/4″ or 5/16″ Round Hole sizes.
2″ Reach/throat for punching paper, light card stock and thin rigid
plastic up to 18 mil (0.018″). If you are punching a different material,
please mail sample material to us, so we can suggest the best model for
your application.
Usually in stock in small quantities. If not in stock at the moment, production time is approximately 4 weeks.
|
Punch No.
|
Reach
|
Length
|
Weight Dozen
|
|
#464
|
2 Inch
|
6 Inch
|
6-3/4 lbs.
|
|
#468
|
2 Inch - with Reservoir
|
6 Inch
|
8 lbs.
|
Punching Specifications:
A - Round Holes: 1/8", 3/16" or 1/4"
B - Single Characters: Numerals 0 to 9 or Letters A to
Z in 3/16" size.
C - Single Characters: Numerals 0 to 9 or Letters A to Z
in 1/4" size.
D - Full Selection of Assorted Designs
F & G - Two Characters: Numerals or Letters 
, 
, 
etc., 1/8" or
3/16"size.
H - Three Characters: Numerals or Letters "YES", "123" or "A12", etc., 1/8" size only.
| Position "A"
|
Position "B"
|
Position "A" only for #464 multiple
characters.
See model #448 if position "B" is
required.
|
|
|
Punching Specifications:
A - Round Holes.............1/8" 3/16" 1/4"
B - Round Holes.............5/16" Extra Charge.
Additional information:
| Weight |
1.5 lbs |
| Dimensions |
6 × 2.5 × .75 in |
| Round Hole Size |
1/8, 3/16, 1/4, 5/16 Extra Charge
|
Questions or comments call us at 323-582-6461 or email us at info@HPRubberStamp.com