0
$0.00Cart
0
×

Your shopping cart is empty.

View Cart
  • Home
  • Marking Device Products
  • Custom Name Plates and Sign Frames
  • Automatic Numbering Machines
  • Aerospace and Industrial Inks
  • Embossers - Desk, Pocket and Electric Seals
  • Ink Pads
  • Ink Cartridges
  • Stenciling
  • Notary Public Stamps and Embossers
  • Professional Seals
  • Monograms Stationery Products
  • How To Change a Trodat Ink Cartridge
  • How To Change a Shiny Printy Pad
  • How To Change the Rubber Die
  • Self-Inking vs Pre-Inked Stamps
  • History
  • Order Form

AD-2001 Enthone - Hysol Retarder - Gallon

SKU: IN-AD2001
Your Price $478.20
Quantity
 

AD-2001 Enthone - Hysol Retarder - Gallon

Retarder for Enthone 50 series CAT-L-INK

Most epoxy inks can be modified with thinners, retarders, flattening paste, reducers, or clear bases. Before adding any of these products, please refer to the specific ink technical data sheet for additive proportion instructions.

SCREEN PRINTING OR USING 2 PART EPOXY PASTE INKS

THINNING: If thinning is required, add small amounts of AD-2001 thinner. Additions should be made after the induction period. Thinner additions extend the pot life. AD-2001 Thinner for nominal adjustments in viscosity. Incrementally add 3-6% by weight.

SPRAYING: Following the induction period, thin with AD-2002 or a blend of 80% PM glycol ether and 20% methyl isobutyl ketone at 25-40% by volume, depending on air pressure and orifice of spray unit. Thinner additions will extend the pot life considerably. AD-2002 Thinner for spray applications. Add 25-40% by volume.

RETARDING: Small amounts of AD-2003 or carbitol acetate are recommended. Additions should only be made after the induction period has been observed. AD-2003 Retarder to extend open time. Incrementally add 3-6% by weight.

REMOVAL: Enthone SC1710 screen cleaner, AD-2003 or any lacquer wash will effectively clean stamps, screens, and equipment before the ink cures.

THIS IS CONSIDERED A HAZARDOUS PRODUCT AND CAN ONLY SHIP GROUND

Any questions call us at 323-582-6461 or email
info@HPRubberStamp.com

    Product Options and Custom Information
    Certificate of Compliance:
    Special Instructions:

    Customer Reviews